7 Best Professional-Grade Dog Clippers For Thick Coats (2026)

Anyone who has ever run a bargain-bin trimmer through a Husky’s undercoat knows the sound: a whining motor, a stall, and a dog that suddenly decides grooming day is the worst day of the year. Professional-grade dog clippers for thick coats exist because thin, plastic-bodied trimmers simply were not built for the job — they were built for touch-ups on a Chihuahua, not for wading through the dense double coat of a Malamute or the corded fur of an Old English Sheepdog. A professional-grade clipper is defined by three things working together: a motor strong enough to maintain speed under load, a housing and blade system engineered to shed heat rather than trap it, and a detachable blade platform that lets you match the tool to the coat instead of forcing the coat to match the tool.

Canadian winters make this a genuinely practical problem, not a luxury one. Dogs bred for cold climates — breeds like the Newfoundland, which carries a dense fur-type double coat — pack on serious insulation, and that insulation has to be managed year-round or it turns into mats, hot spots, and miserable grooming sessions. This guide breaks down seven real clippers currently sold on amazon.ca, from a budget-friendly cordless option to full commercial workhorses, with honest analysis of motor power, heat management, and long-term value so you can pick the one that actually matches your dog’s coat and your grooming habits.

Quick Comparison Table

Reading this table, the pattern is pretty clear: strokes per minute (SPM) climbs sharply once you move past the budget tier, and that climb is exactly what separates a clipper that glides through a thick coat from one that bogs down halfway through a pass. The Andis AGC2 UltraEdge Super 2-Speed tops the SPM chart among corded models, while the Wahl Bravura Lithium proves cordless doesn’t have to mean weaker — it actually out-paces most corded competitors. Budget buyers should note that the oneisall RFC676‘s high RPM number looks competitive on paper, but rotary SPM and small-motor RPM aren’t directly comparable in real cutting torque, which we’ll unpack in the motor power section below.

💬 Just one click — help others make better buying decisions too!😊

Top 7 Professional-Grade Dog Clippers for Thick Coats: Expert Analysis

1. Andis AGC2 UltraEdge Super 2-Speed — fastest strokes-per-minute for stubborn double coats

The headline number here is the motor: a dual-speed rotary motor delivering 3,400 or 4,400 strokes per minute for smooth, efficient cutting across coat types. In practice, that top speed is the difference between three passes through a matted Husky flank and one clean sweep. The housing design matters just as much as the raw power — a cool-running design eliminates the vents and fans that typically clog with hair, so the unit stays cooler and cleaner during long grooms. That’s a genuinely clever engineering choice: most overheating complaints on cheaper clippers trace back to blocked airflow, not the motor itself. Based on the spec comparison, this is the clipper serious hobbyists and mobile groomers reach for when a dog’s coat has “blown” and turned into a dense, resistant mat.

Reviewers consistently note that the detachable blade hinge locks securely, which matters more than it sounds — a wobbling blade on a fast-spinning motor is how nicks happen. The 14-foot heavy-duty cord also gives you real freedom of movement around a squirmy dog, something cordless units can’t always match on runtime.

Pros:

• ✅ Dual-speed rotary motor hits 4,400 SPM for tough mats
• ✅ Vent-free housing resists clogging and overheating
• ✅ Wide blade compatibility across major brands

Cons:

• ❌ Corded design limits mobility around larger dogs
• ❌ Heavier housing can tire out a beginner’s wrist

At the time of research, the Andis AGC2 UltraEdge Super 2-Speed sits in the C$230-C$280 range on amazon.ca. For anyone grooming a genuinely thick-coated breed more than once a month, the value case is straightforward: fewer passes mean less stress on the dog and less time hunched over a grooming table.

2. Wahl KM10 — quietest brushless motor for all-day professional use

What most buyers overlook about the KM10 is that its brushless motor isn’t just a durability feature — it directly changes the grooming experience for noise-sensitive dogs. It runs with minimal vibration and an ultra-quiet noise level of just 63 decibels, which is a genuinely useful spec for anxious rescues or senior dogs who spook at a loud motor. On paper this means longer sessions without the dog trying to bail off the table.

The motor’s other advantage is longevity paired with power: the brushless motor is designed to run cooler and quieter and last for over 10,000 hours, and innovative constant speed control maintains cutting power and torque to tackle even the thickest coats. That constant-speed behaviour is the real story here — a lot of clippers lose torque the moment they hit resistance, which is exactly when a double coat needs the most power. Aggregated review sentiment across grooming supply retailers frequently praises the KM10’s balance of comfort and cutting power for daily commercial use; if you can’t verify a specific retailer’s review count, treat that as directional rather than exact.

Pros:

• ✅ Brushless motor rated for over 10,000 hours of use
• ✅ Whisper-quiet 63-decibel operation calms nervous dogs
• ✅ Constant Speed Control holds torque in dense fur

Cons:

• ❌ Premium price point compared to entry-level clippers
• ❌ Corded only, no cordless version of this exact model

The Wahl KM10 typically lands in the C$220-C$260 range. For a mobile groomer running back-to-back appointments, the motor’s rated lifespan alone can offset the higher upfront cost within a year or two of daily use.

3. Oster Turbo A5 2-Speed — classic heavy-duty workhorse for coarse, thick coats

The A5 platform has been a professional standard for decades, and the Turbo version earns that reputation through raw motor output: it slides through thick, coarse hair with over 4,000 strokes per minute for a smoother coat finish. Here’s what the spec sheet won’t tell you, but reviewers note — the wider blade sweep on Oster’s detachable system means fewer overlapping strokes are needed to clear the same patch of fur, which meaningfully cuts grooming time on a big double-coated dog.

Durability is the other pillar of the Oster reputation. The virtually unbreakable housing has better airflow and is less noisy during grooming, and it ships ready to work: it includes a #10 CryogenX blade, blade guard, blade oil, clipper grease, cleaning brush, extra brush, and spring assembly. That’s a genuinely complete starter kit, which matters for anyone new to detachable-blade systems who doesn’t yet own maintenance supplies. A recurring theme in aggregated review sentiment is durability after drops — several owners report the housing surviving falls that would crack cheaper plastic clippers, though a minority mention the motor running warm during extended full-body clips on the high setting.

Pros:

• ✅ Over 4,000 SPM cuts through coarse, matted fur fast
• ✅ Ships with a complete blade and maintenance kit
• ✅ Durable housing tolerates drops on the grooming table

Cons:

• ❌ Some owners report warmth build-up on extended high-speed use
• ❌ Bulkier grip than lighter competitor models

Expect the Oster Turbo A5 2-Speed in the C$170-C$210 range. It’s the clipper to pick if you want proven, decades-old engineering over the latest brushless tech.

4. Andis Excel 5-Speed — most adjustable speed range for mixed grooming tasks

Where most clippers on this list offer two speeds, the Excel gives you five: variable speeds ranging from 2,500 SPM to 4,500 SPM, so lower speeds allow for cooler, gentler clipping around sensitive areas while higher speeds deliver a smoother coat finish for full-body clipping. Based on the spec comparison, that range is the real selling point for anyone who grooms mixed coat types — a household with both a wiry terrier and a fluffy Sheltie benefits from one tool that can do delicate face-and-paw work at low speed and then switch to full power for the Sheltie’s undercoat.

The torque story matters too. A 4×4 blade drive delivers 25% extra blade torque compared to Andis’s standard two-speed models, which translates to less bogging down when the blade hits a dense mat. It’s also notably light on the wrist — it weighs 12.5 ounces, making it one of the more comfortable options for groomers doing several dogs back to back.

Pros:

• ✅ Five-speed range from gentle trims to full-body clips
• ✅ 25% more blade torque than standard two-speed models
• ✅ Lightweight body reduces hand fatigue over long sessions

Cons:

• ❌ More speed settings mean a learning curve for beginners
• ❌ Detachable blades sold separately add to total cost

At the time of research, the Andis Excel 5-Speed sits in the C$240-C$290 range. What most buyers overlook is that the versatility here can actually reduce your total clipper count — one Excel can replace what might otherwise be two single-purpose tools.

5. Wahl Bravura Lithium — best cordless freedom without sacrificing power

Cordless clippers have a reputation for underperforming corded units on thick coats, and the Bravura Lithium is the model that broke that assumption. Its 5,500 SPM motor delivers smooth, consistent performance, which actually outpaces several corded competitors on this list, and constant speed control maintains cutting power through thick or difficult coats. What the spec sheet won’t tell you is how much that constant-speed behaviour matters on battery power specifically — a lot of cheaper cordless tools slow down as the battery drains, but Wahl engineered this one to hold full speed until it’s genuinely empty.

Runtime backs up the claim: the lithium-ion battery provides up to 90 minutes of cordless runtime, which is enough for several full-body grooms in one charge, and a 60-minute full charge time means minimal downtime between sessions. The 5-in-1 adjustable blade covering sizes #9 through #40 also means you’re not swapping physical blades every time you change the cut length. Aggregated feedback from professional users on grooming supply sites frequently cites the Bravura’s blade versatility as a reason it becomes their primary clipper rather than a backup unit.

Pros:

• ✅ 5,500 SPM motor outpaces several corded competitors
• ✅ 90 minutes of cordless runtime on a 60-minute charge
• ✅ Adjustable 5-in-1 blade covers five cut lengths in one piece

Cons:

• ❌ Higher price point than most cordless competitors
• ❌ Battery will eventually need replacement after heavy use

The Wahl Bravura Lithium generally runs in the C$270-C$320 range. For mobile groomers without reliable outlet access, this is the clipper that removes the biggest argument against going cordless.

6. Andis AGC2 2-Speed — best affordable step into professional-grade power

Not every household needs the fastest clipper on the shelf, and the base AGC2 is Andis’s answer for buyers who want real professional-grade engineering without the premium price tag. Two rotary motor speeds — 2,700 and 3,400 SPM — cut through even the thickest coats with ease, and it shares the same cooling philosophy as its pricier UltraEdge sibling: a sealed motor runs cool without vents or fans, reducing noise for sensitive pets. Here’s what the spec sheet won’t tell you — that shared housing design across Andis’s whole AGC2 line means this base model benefits from the same heat-management engineering the flagship uses, just at a slightly lower top speed.

Blade compatibility is another underrated strength. It works with UltraEdge, CeramicEdge, ShowEdge, and Oster A-5 blades, which means if you eventually upgrade to a faster Andis or Oster clipper, your existing blade collection carries over. The rugged housing and 14-foot cord are built for daily professional use, so this isn’t a toy despite the friendlier price.

Pros:

• ✅ Two-speed motor handles thick coats at a lower price
• ✅ Shares Andis’s cool-running vent-free housing design
• ✅ Compatible with the same blades as premium Andis models

Cons:

• ❌ Lower top speed than the UltraEdge Super version
• ❌ No cordless option available in this model line

Expect the Andis AGC2 2-Speed in the C$150-C$190 range on amazon.ca. Based on the spec comparison, it’s the clipper to buy if you want to build a blade collection now and upgrade the handpiece later.

7. oneisall RFC676 — best budget cordless clipper for thick coats at home

For pet owners easing into home grooming without committing to salon-grade pricing, the RFC676 offers genuinely useful features at a fraction of the cost. It uses a 6,800 RPM motor paired with a specialized stainless steel fixed blade and ceramic moving blade to glide through thick or matted hair without snagging. What most buyers overlook is the waterproofing: the IPX7-rated main clipper body allows convenient cleaning under running water, a rare feature at this price point that makes post-groom cleanup dramatically simpler than wiping down a corded unit.

Runtime is another surprising strength for a budget cordless tool — it offers an industry-leading 4 hours (240 minutes) of runtime, and an integrated LCD screen shows real-time battery percentage along with a blade-oiling reminder. Aggregated review sentiment on major retail sites is generally positive for occasional home use, though it’s worth being honest: this is a consumer-grade motor, not a commercial rotary motor, and it will not match the sustained torque of the Andis or Wahl units above on a genuinely matted double coat.

Pros:

• ✅ IPX7 waterproof body rinses clean under a tap
• ✅ Four-hour battery runtime on a single charge
• ✅ LCD screen tracks battery and blade maintenance

Cons:

• ❌ Motor torque trails behind rotary professional clippers
• ❌ Not built for daily commercial grooming volume

At the time of research, the oneisall RFC676 sits under C$100, making it the clear entry point for anyone testing the waters of at-home grooming before investing in commercial-grade equipment.

Top 7 Products at a Glance

Looking at the table, a clear tiering emerges: the oneisall RFC676 and Andis AGC2 2-Speed serve casual and budget-conscious groomers, the Oster Turbo A5 and Wahl KM10 occupy the reliable mid-to-upper professional tier, and the Andis AGC2 UltraEdge Super 2-Speed, Andis Excel 5-Speed, and Wahl Bravura Lithium represent the top end where speed, torque, and battery innovation converge. If your dog’s coat regularly mats or you’re grooming multiple thick-coated dogs, the jump from budget to mid-tier pays for itself in reduced grooming time alone.

Motor Power and Heat Management: What Actually Cuts Through Thick Fur

Strokes per minute gets all the marketing attention, but it’s only half the story. What most buyers overlook is that a high SPM number paired with a poorly ventilated housing will overheat faster than a moderate SPM number paired with smart airflow design. This is exactly why Andis builds its AGC2 line around a cool-running design that eliminates vents and fans that can become clogged with hair rather than chasing raw speed alone — a clogged vent traps heat right at the motor, and that heat eventually transfers straight to the blade against your dog’s skin.

Torque matters as much as top speed. A motor that hits 4,400 SPM in an ad but bogs down the instant it contacts a mat is functionally slower than a well-torqued 3,400 SPM motor that holds steady under load. This is the entire premise behind Wahl’s Constant Speed Control technology, which automatically adjusts the motor to power through matted and dense coats with ease rather than letting resistance drag the SPM down. Reviewers consistently note that clippers without this feature feel powerful on bare fur but noticeably weaker the moment they hit a genuinely thick patch.

Heat management directly affects your dog’s comfort and safety. Blades that run hot cause skin irritation within seconds of contact, especially on thin-skinned areas like the belly and groin. Professional groomers manage this by rotating blades during long sessions and choosing clippers engineered specifically to run cool, rather than relying on breaks alone to prevent burns.

Practical Usage Guide: Getting the Most from Heavy-Duty Dog Clippers for Thick Fur

Buying the right clipper is only step one — technique determines whether you actually get the smooth, even results the equipment is capable of. Before the blade ever touches fur, the coat needs to be fully dry and brushed out; damp or matted hair will clog even a premium motor and force it to work far harder than it should.

Once you’re clipping, a few habits separate a clean groom from a frustrating one:

• Brush thoroughly before clipping. Removing loose undercoat first prevents the blade from immediately clogging on your first pass.
• Work with the coat’s natural lay, going in the direction of hair growth for the first pass on thick, double-coated breeds to avoid pulling.
• Oil the blade every 10-15 minutes of active use on dense coats — a dry blade generates friction heat far faster than a lubricated one.
• Let the blade cool if it becomes noticeably warm to the touch against your own hand before continuing near your dog’s skin.
• Replace the blade drive assembly on schedule; most manufacturers recommend monthly replacement under regular professional use to maintain full cutting power.

A common first-30-days mistake is running a clipper at full speed for an entire body clip without pausing. On genuinely thick or matted coats, working in shorter, controlled sections with brief blade-cooling breaks produces a cleaner, safer result than trying to power through in one continuous pass.

Real-World Scenarios: Matching Clippers to Thick-Coat Breed Grooming Needs

Thick-coat breed grooming needs vary enormously depending on the dog, the household, and how often grooming happens, so matching the right tool to the right situation matters more than chasing the single “best” clipper on the market.

The weekend Husky owner grooming one dog every few weeks during shedding season doesn’t need commercial-grade speed. The Andis AGC2 2-Speed or even the budget oneisall RFC676 covers seasonal de-shedding and touch-ups without an unnecessary investment, provided the owner accepts more frequent, shorter sessions rather than one marathon groom.

The mobile groomer running four or five appointments a day on a mix of Golden Retrievers, Shepherds, and doodles needs sustained torque and all-day comfort. The Wahl KM10‘s quiet brushless motor and long-rated lifespan make it well suited to back-to-back commercial use, while the Wahl Bravura Lithium solves the outlet-access problem for house-call visits.

The multi-dog household with genuinely dense coats — think a Malamute and a Chow Chow under one roof — benefits from the versatility of the Andis Excel 5-Speed, where lower speeds handle sensitive face and paw work on one dog while higher speeds tackle the other’s stubborn undercoat, all from a single clipper.

Problem → Solution: Common Thick-Coat Clipping Issues

Even with the right clipper, thick and double coats create predictable problems. Here’s how to handle the most common ones.

Problem: the blade keeps snagging and pulling. This is almost always a dull blade or a coat that wasn’t fully dried and brushed before clipping. Solution: brush out loose undercoat completely, ensure the coat is bone-dry, and swap to a sharper or wider blade rated for dense fur, such as the CryogenX blade included with the Oster Turbo A5 2-Speed.

Problem: the clipper overheats mid-session. Solution: switch to a lower speed setting if your clipper offers one, like the Andis Excel 5-Speed‘s 2,500 SPM setting, oil the blade more frequently, and take short cooling breaks rather than pushing through resistance.

Problem: the dog is trying to shave down to “stay cool” for summer. This is a well-intentioned mistake with real risks. Veterinary experts caution that a double coat actually regulates body temperature in both directions, and removing it can backfire — clipping too close to the skin causes pain and irritation, and a stripped coat leaves skin exposed to sunburn. Solution: de-shed the undercoat thoroughly with the right blade guard rather than shaving to the skin, and if you’re ever unsure whether your dog is overheating, University of Guelph veterinary specialists recommend watching for excessive panting and drooling as early warning signs.

Problem: uneven cut lines after clipping. Solution: use a consistent guide comb length across each body section, and follow up with thinning shears to blend transition areas rather than trying to fix unevenness with the clipper alone.

How to Choose Heavy-Duty Dog Clippers for Thick Fur

Picking the right heavy-duty dog clippers for thick fur comes down to matching a handful of specific criteria to your actual grooming needs, not just buying the model with the biggest number on the box.

1. Check the SPM range first. Look for a minimum of 3,000 SPM on the low setting for genuinely thick or double coats; anything lower will struggle and overheat faster.
2. Confirm blade compatibility. A clipper that accepts standard A5-style detachable blades gives you access to the widest range of blade sizes and future upgrades.
3. Weigh corded versus cordless honestly. Corded units offer unlimited runtime but limit mobility; cordless units like the Bravura Lithium now match corded power for most home and mobile use.
4. Prioritize heat management over top speed alone. A vent-free, cool-running housing design matters more day-to-day than an extra few hundred SPM.
5. Consider noise sensitivity. Brushless motors like the one in the Wahl KM10 run noticeably quieter, which matters enormously for anxious or noise-reactive dogs.
6. Factor in grip weight and ergonomics. If you’re grooming multiple dogs in one session, a lighter clipper like the Andis Excel meaningfully reduces hand fatigue.
7. Match your budget to your actual frequency of use. Occasional home groomers rarely need to spend at the top of the range; frequent or professional use justifies the investment.

High-Power Clippers for Double Coats vs. Standard Clippers

The gap between high-power clippers for double coats and standard single-speed trimmers isn’t marketing spin — it shows up directly in cutting performance and dog comfort.

The analysis here is straightforward: a standard clipper isn’t necessarily poorly made, it’s simply engineered for a different job. Running a basic single-speed trimmer through a genuinely thick double coat forces the motor to work well outside its designed load, which is exactly when overheating and blade drag happen. Reviewers consistently note that once they switch from a big-box basic trimmer to a genuinely professional-grade unit like the Andis AGC2 UltraEdge Super 2-Speed, the number of passes needed to finish a groom drops noticeably, which also reduces overall handling time and stress for the dog.

What Groomer-Grade Equipment Gets Right (And What’s Marketing Hype)

Not every feature printed on a clipper box translates into a real-world benefit, so it’s worth separating genuine groomer-grade equipment advantages from features that sound impressive but don’t move the needle much.

What actually matters: detachable blade systems that share compatibility across brands (so your blade investment isn’t locked to one clipper), sealed vent-free motor housings that genuinely reduce overheating, and constant-speed torque control that holds cutting power under resistance. These three features consistently separate professional tools from consumer ones, and reviewers across multiple clipper lines cite them as the reasons a tool holds up under repeated heavy use.

What’s often overstated: an extremely high top-end SPM number in isolation, without corresponding torque control, can look impressive on a spec sheet while performing no better in practice than a moderate-speed clipper with better heat and load management. Similarly, cosmetic housing colours and “ergonomic” branding claims rarely correlate with actual comfort — grip texture and overall weight distribution matter far more than marketing language suggests.

Clippers for Professional Groomers vs. At-Home Use

Clippers for professional groomers are generally built to a different standard of durability than tools marketed for occasional home use, and understanding that distinction helps set realistic expectations either way.

Professional groomers typically run clippers for six to eight hours a day, several days a week, which is why brands like Wahl rate their brushless motors for thousands of hours of continuous use rather than the intermittent duty cycle a home clipper is designed around. In Canada, professional certification in this field runs through independent bodies — Canadian Professional Pet Stylists is recognized as the country’s only nation-wide dog grooming certifying association, and groomers pursuing that credential are trained on commercial-grade equipment as part of their practical assessments.

For at-home use, the calculus is different. A pet owner grooming one or two dogs every few weeks doesn’t need a motor rated for 10,000 hours of continuous operation — the Andis AGC2 2-Speed or oneisall RFC676 covers the realistic duty cycle without the premium price tag attached to commercial-grade durability. Where at-home groomers do benefit from professional-grade features is in heat management and blade sharpness, since those directly affect the dog’s comfort regardless of how often the clipper gets used.

Long-Term Cost & Maintenance

The sticker price on a clipper is only part of the real cost of ownership. Detachable blades typically need sharpening or replacement periodically depending on use frequency, and neglecting that maintenance is one of the fastest ways to shorten a clipper’s usable life.

Interpreting this data, the value story shifts depending on how often you actually groom. A household grooming one dog seasonally will likely never wear out a budget clipper before its motor naturally reaches end of life, making the lower upfront cost the smarter choice. A mobile groomer running daily appointments, on the other hand, will burn through a budget motor’s lifespan within months, at which point the premium tier’s higher rated hours and replaceable blade drive assemblies make it the cheaper option per groom over a year or two.

Ready to stop fighting your dog’s coat every grooming session? 🐾 Compare current prices on the models above before your next appointment.

Safety, Regulations, and Compliance for Grooming Equipment in Canada

Beyond technique, there are a few practical safety and compliance points worth knowing before buying an electric clipper for use in Canada. Corded electrical grooming tools sold here fall under general appliance safety rules — Canadian law requires electrical machinery and appliances connected to power sources to conform to CSA safety standards in all provinces and territories, and reputable brands like Andis, Wahl, and Oster manufacture to these recognized Standards Council of Canada safety benchmarks for household electrical appliances.

On the animal-welfare side, resist the seasonal temptation to shave a double coat down to the skin in summer heat. As covered in the problem-solution section above, veterinary specialists warn that a dog’s coat plays an active role in temperature regulation, and dogs are still vulnerable to heat-related illness regardless of how short their fur is clipped — panting, drooling, and lethargy are signs to watch for during and after any grooming session in warm weather. Keep guard combs on hand for any close work near the belly, groin, or ears, where clipper burns are most common, and always let a blade cool before working near thin-skinned areas.

Frequently Asked Questions

Conclusion

Choosing among professional-grade dog clippers for thick coats really comes down to being honest about your actual grooming frequency and your dog’s specific coat type. If you’re grooming a genuinely dense double coat regularly, the motor power and heat management built into models like the Andis AGC2 UltraEdge Super 2-Speed or Wahl KM10 will save you real time and spare your dog unnecessary discomfort. If you’re easing into home grooming or only tackling seasonal shedding, a more affordable option like the Andis AGC2 2-Speed or oneisall RFC676 covers the job without overspending.

Whatever tier you land in, the fundamentals stay the same: prioritize heat management over raw speed alone, keep blades sharp and oiled, and never assume more power means less technique is required. A well-matched clipper paired with proper brushing and patience will consistently outperform an expensive tool used carelessly. Check current prices on amazon.ca before your next grooming session, since availability and pricing shift regularly across these models.

✨ Ready to upgrade your grooming toolkit? 🐕

Browse the clippers above and find the one that matches your dog’s coat and your grooming routine — your dog (and your wrists) will thank you!

Recommended for You

• Dog Clippers Under $100 CAD: 7 Best Budget Picks (2026)
• Face Trimmer For Dogs With Sensitive Skin: 7 Best Picks (2026)
• 7 Best Paw Trimmer for Dogs Options in 2026 (Vet-Backed Picks)

Disclaimer: This article contains affiliate links. As an Amazon Associate, I earn from qualifying purchases. If you purchase products through these links, we may earn a small commission at no additional cost to you.

✨ Found this helpful? Share it with your friends! 💬🤗